EN
20
Laundry may be added or taken out by
openingthedoor.Ifthe“Lid”lampdoes
not light up continuously at the end of
this time, the water level in the machine
is not suitable and laundry cannot be
added.Youcanresumetheprogram
bypressingthe“Start/Pause/Cancel”
button again.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on.
C Yourmachinecanbeturnedon
andoffwithOn/Offbuttonwhile
the child-proof lock is activated. In
this case, your machine will resume
its program with child-proof lock
activated.
In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
new program can be selected or started
after“Programiscancelled”inorderto
change the washing program.
Tocancelanyselectedprogram;
• Press“Start/Pause/Cancel”button
for 3 seconds. The machine starts
todischargethewater.“Wash”and
“ProgramFinished”lightswilllight
up.
• “Start/Pause/Cancel”and“Wash”
lights will go off after discharging
processisoverandthe“Lid”light
will start flashing.
• “Lid”lampwilllightupcontinuously
whenthedoorisunlocked.Youcan
select and start a new program.
• Iftheprogramiscancelledinthe
middleoftheprocess,“Wash”
and“ProgramFinished”lightswill
light up. The machine can drain
all the water or can take in water
for 3 times at most to cool down
the clothes and complete draining
process.
• Whenthewaterdischargingprocess
iscompleted,the“Wash”lightwill
gooff,“ProgramFinished”light
willlightupandthe“Lid”lightwill
continuously flash until the door
isunlocked.Youcanmakeanew
programselectionwhenthe“Lid”
light is illuminated continuously.
End of Program
The“ProgramFinished”lamponthe
program follow-up indicator will light up
when the program comes to an end.
The lid is unlocked 2 minutes later, the
“ProgramFinished”and“Lid”lampswill
light up continuously. The machine is
now ready for a second cycle.
If any key is pressed when the machine
is at the end of the program or if
the position of the selection knob is
changed,the“ProgramFinished”light
willgooffandonlythe“Lid”lampwill
remainaslit.Meanwhile,ifthedooris
stilllocked,the“Lid”lightwillcontinue
flashing until the door is opened.
Pressthe“On/Off”buttontoshutdown
the machine.