Beko 15065 Washer/Dryer User Manual


  Open as PDF
of 32
 
EN
18
Auxiliary functions
Auxiliary function selection keys
• Desiredauxiliaryfunctiondepending
on the program is selected.
• Somecombinationscannotbe
selected together.
• Warningsignalontheselected
auxiliary function will light up.
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see,“ProgramSelectionTable”)
• Prewash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and time.
C Pre-washwithoutdetergentis
recommended for lace and curtains.
Less detergent should be put in the
main wash compartment as loose
knitfabrics(lace)foamtoomuch
due to its meshed structure.
• Rinse Plus
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by
the remainder detergent on the clothes
will be decreased.
• Rinse Hold
If you do not want to unload your
clothes immediately after the cotton,
synthetics, woolen and delicate fabrics
program, you may release your clothes
inside the machine in the last rinsing
water by pressing the rinse hold button
in order to prevent your clothes become
wrinkled. After this process you may
spin your laundry by pressing “Start/
Pause/Cancel”buttonoryoumayend
theprogrambypressing“Start/Pause/
Cancel”buttonfor3sec.
• In the machines equipped with spin
speed selection knob or button, you
can spin by selecting the desired
spinspeedandpress“Start/Pause/
Cancel”button.
• As for machines not equipped with
a spin speed selection knob, you
can end the program without a
spin cycle by pressing the “Start/
Pause/Cancel”buttonanddraining
the water. If you wish your clothes
be spun, you can spin them by
selecting“pump+spin”program.
• No Heat
If you wish to wash your clothes in cold
water, you can use this program.
• No Spin
Youmayusethisprogramifyoudonot
want to spin your clothes at the end of
cottons, synthetics, woolen or delicate
programs.
• Spin speed reduction
Youmayusethespeedreductionbutton
whenever you wish to spin your clothes
below the maximum spin speed. When
speed reduction button is pressed, spin
speed will be at the minimum rpm given
on the panel.
Starting the Program
1. Press“Start/Pause/Cancel”button
to start the program.
2. “Start/Pause/Cancel”buttonwill
light up to indicate that the program
has started.
3. Thedoorislockedandthe“Lid”
light fades.
Progressing a program
Progressofarunningprogramisshown
through the program follow-up indicator.
• At the beginning of every program
step, the relevant indicator lamp will
light up and light of the completed
step will turn off. The symbol that is
lit up at the far right of the series of
symbols indicates the step that is
being carried out.
 previous next