Filter
Top Products
1950756200 English (US), French (Canadian), Spanish (US) {PDF Created 12/05/09 09:56:00}
11
Troubleshooting TD4183 Issue 1
B
efore you call our Customer care department, go through the following troubleshooting suggestions.
Problem:
The dryer won’t start
It is taking a long time to dry
Possible causes / Solutions:
• The plug is not plugged into the socket, or not making contact.
• There has been a power outage.
• The fuse has blown.
• The door is not closed securely.
• The PROGRAMS knob has not been set properly (see Start and
Programs).
• The START button has not been pressed (see Start and Programs).
• The filter has not been cleaned (see Maintenance).
• The temperature setting is not ideal for the type of fabric you are
drying (see Start and Programs).
• Automatic / Sensor Dry Programs require a
HIGH temperature setting (see Start and Programs).
• The correct program has not been selected for this load
(see Start and Laundry).
• The Exhaust Duct is obstructed (see Installation).
• The air intake vent is obstructed (see Installation).
• The permanent Ventilation flap on the storm cover is obstructed
(see Installation).
• The items are too wet (see Laundry).
• The dryer is overloaded (see Laundry).
If you still have a problem call our Customer Care Department on 1 800 356 0766
Spare Parts
This dryer is a complex machine. Repairing it yourself or having a non-authorized person try to repair it could cause
harm to one or more persons and to the machine, and could invalidate the spare parts warranty.
Call an authorized service center if you experience problems while using the machine.
Contact number:1 800 356 0766
EN
TD4083 Issue 2