Filter
Top Products
113344-9 www.amdry.com 31
L. PREOPERATIONAL INSTRUCTIONS
To start the dryer:
1. The light emitting diode (L.E.D.) display will read “REAdY.”
2. Press the “E” on the keypad.
3. The dryer will start and the display will flash “dRYING MANUAL CYCLE E,” “dRY TEMP 180F,”
“COOL TEMP 80F,” “30 REMAIN,” and “dRUM TEMP.”
Refer to the User’s Manual for detailed operating instructions.
M. SHUTDOWN INSTRUCTIONS
If the dryer is to be shutdown (taken out of service) for a period of time, the following must be performed:
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the gas or steam supply:
a. GAS MODELS...discontinue the gas supply.
SHUT OFF
external gas supply shutoff valve.
b. STEAM MODELS...discontinue the steam supply.
1) SHUT OFF
external (location furnished) shutoff valve.
2) SHUT OFF
external steam valves in the supply lines and the return lines.