Filter
Top Products
5
MAXIMUM CAPACITY (DRY WEIGHT) 75 lb 34 kg
TUMBLER DIAMETER 37”
94 cm
TUMBLER DEPTH 36”
91.5 cm
TUMBLER VOLUME 22.4 cu ft
634.2974 L
TUMBLER MOTOR 1 hp*
0.75 kW
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
EXHAUST CONNECTION (DIAMETER) 10”
25.4 cm
DRYERS PER 20’/40’ CONTAINER 10 / 20
DRYERS PER 48’/53’ TRUCK 24 / 24
WATER CONNECTION 3/4-11.5 NH
VOLTAGE AVAILABLE 120-480v 1,3ø 2,3,4w 50/60 Hz
APPROX. NET WEIGHT 741 lb
336.1 kg
APPROX. SHIPPING WEIGHT 793 lb
359.7 kg
HEAT INPUT 200,000 Btu/hr 50,400 kcal/hr
AIRFLOW 900 cfm
25.48 cmm
INLET PIPE CONNECTION 3/4” F.N.P.T.
VOLTAGE AVAILABLE 208-480v 3ø 3,4w 50/60 Hz
APPROX. NET WEIGHT 741 lb
336.1 kg
APPROX. SHIPPING WEIGHT 793 lb
359.7 kg
AIRFLOW 900 cfm
25.48 cmm
OVEN SIZE
kW Btu/hr
kcal/hr
30 102,433 25,812
36 122,919
30,975
VOLTAGE AVAILABLE 120-480v 1,3ø 2,3,4w 50/60 Hz
APPROX. NET WEIGHT 836 lb
379.2 kg
APPROX. SHIPPING WEIGHT 888 lb
402.8 kg
COMPRESSED AIR VOLUME 0.75 cfh 0.02 cmh
COMPRESSED AIR CONNECTION 1/8” F.N.P.T.
AIRFLOW 900 cfm
25.48 cmm
STEAM CONSUMPTION 239 lb/hr 108 kg/hr
OPERATING STEAM PRESSURE 125 psi max
8.6 bar
BOILER HP (NORMAL LOAD) 7 Bhp
SUPPLY CONNECTION 1” F.N.P.T.
RETURN CONNECTION 1” F.N.P.T.
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
GasElectricSteam
Shaded areas are stated in metric equivalents 06/14/04
* ALL reversing dryers are supplied with two (2) 3-phase (3ø) motors standard: a 1 hp (0.74 kW) blower motor and a
1/2 hp (0.37 kW) drive motor.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.