Filter
Top Products
38
NOTE: The dryer can be stopped at any time by opening main door or by pressing the “STOP”
key. To restart the dryer, press the “START” key or preprogrammed cycle key
(i.e., “E”).
NOTE: Pressing keyboard (touch pad) key “A,” “B,” “C,” “D,” and “F” will also start the dryer. The
six (6) preprogrammed drying cycles (“A” - “F”) have been stored in the microprocessor
controller’s (computer’s) memory. Refer to the Computer Programming Manual supplied with
dryer for more specific operating information.
NOTE: Selection (setting) changes can be made at any time during the drying cycle by pressing the
“STOP” key twice. The light emitting diode (L.E.D.) display will return to “READY”
at which time a new cycle selection can be made.
b. Dual Timer Dryers
1) Turn drying timer knob for a time of 20 minutes.
2) Select “Temperature.”
3) Press “Start” button.
4) To stop dryer, open the main door.
L. SHUT DOWN INSTRUCTIONS
If the dryer is to be shut down (taken out of service) for a period of time, the following must be performed:
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the heat supply:
a. GAS MODELS...discontinue the gas supply.
1) SHUT OFF external gas supply shutoff valve.
2) SHUT OFF internal gas supply shutoff valve located in the gas valve burner area.
b. STEAM MODELS...discontinue the steam supply.
1) SHUT OFF external (location furnished) shutoff valve.
2) SHUT OFF internal steam valves in the supply lines and the return lines.