Filter
Top Products
22
CAUTION: The dryer must be grounded. A ground lug has been provided for this purpose.
IMPORTANT: A CIRCUIT SERVICING EACH DRYER MUST BE PROVIDED.
The only electrical connections to the dryer are the 3-phase (3ø) leads (L1, L2, L3, and sometimes
Neutral) and ground. Single-phase (1ø) power for the control circuit is done by the factory at the
contactor (relay), and no other wiring connections are necessary.
NOTE: Electrically heated service (amperage) specifications/requirements are not available at the time
of printing. Contact factory for update.