Filter
Top Products
10
B. UNPACKING/SETTING UP
Remove protective shipping material (i.e., plastic wrap, and/or optional shipping box) from dryer.
IMPORTANT: Dryer must be transported and handled in an upright position at all times.
The dryer can be moved to its final location while still attached to the skid or with the skid
removed. To un-skid the dryer, locate and remove the four (4) lag bolts securing the base of the dryer to the
wooden skid. Two (2) are located at the rear base (remove the back panel for access), and two (2) are located in
the bottom of the lint chamber. To remove the two (2) lag bolts located in the lint chamber area, remove the lint
drawer and the three (3) Phillips head screws securing lint door in place.