Filter
Top Products
17
5. Rotate outer door 180°.
180˚
Reverse hinge
1. Use a small
flat-blade screwdriver to remove 2 plug strips
from the inner door. Slide the head of the screwdriver under
the plugs, being certain not to scratch the inner door surface.
Lift up.
2. Remove the 4 screws that attach to the inner door hinge and
move the hinge to the other side. Reinstall the 4 screws.
A
A.Door hinge
3. Reinstall plug strips on opposite side of the inner door.
4. Check
for fingerprints on the glass. Clean glass if necessary.
5. Place the inner door assembly inside the outer door
assembly. To fit correctly, the inner door assembly edge fits
completely inside the outer door assembly edge.
6. R
eassemble the inner and outer door assemblies with the
6 screws.
Reverse the strike
1. Use
a small flat-blade screwdriver to remove plug strip from
the dryer door opening. Slide the head of the screwdriver
under the plugs, being certain not to scratch the dryer
surface. Lift up.
2. Remove the strike
3. Insert strike on the opposite side.
B
A
A.Plug strip (cannot be seen from this angle)
B.Door strike