Filter
Top Products
6
Closet installation - Dryer only
A
B
14" max.*
(356 mm)
18" min.*
(457.2 mm)
48 in.
2*
(3100 mm
2
)
24 in.
2*
(1550 mm
2
)
5"**
(127 mm)
1"*
(25 mm)
31½"
(800 mm)
3"*
(76 mm)
3"*
(76 mm)
A.Side view - closet or confined area
B.Closet door with vents
*Required spacing
**For side or bottom venting, 0" (0 mm) spacing is allowed.
Recessed or
closet installation - Dryer on pedestal
A
B
1"
(25 mm)
(25 mm)
27"
(686 mm)
31½"
(800 mm)
18" min.*
(457.2 mm)
14" max.*
(356 mm)
5"
(127 mm)
**
1"*
1"
(25 mm)
A.Recessed area
B.Side view - closet or confined area
*Required spacing
**For side or bottom venting, 0" (0 mm) spacing is allowed.
Installation spacing for cabinet installation
■ For cabinet installation, with a door, minimum ventilation
openings in the top of the cabinet are required.
7"* (178 mm)
9"*
(229 mm)
7"* (178 mm)
5"**
(127 mm)
31½"
(800 mm)
27"
(686 mm)
1"*
(25 mm)
(25 mm)
1"
(25 mm)
1"
*Required spacing
**For side or bottom venting, 0" (0 mm) spacing is allowed.
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in.
2
*
(31000 mm
2
)
3"* (76 mm)
3"* (76 mm)
1"* (25 mm)
24 in.
2
*
(15500 mm
2
)
*Required spacing
6"* (152 mm)
76"
(1930 mm)
27"
(686 mm)
1"
(25 mm)
1"
(25 mm)
5½"**
(140 mm)
*Required spacing
**For side or bottom venting, 0" (0 mm) spacing is allowed.
Mobile home - additional installation requirements
This dryer is suitable for mobile home installations.
The installation must conform to the Manufactured Home
Constru
ction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280).
Mobile home installations require:
■ Metal exhaust system hardware, which is available for
purchase from your dealer.
■ Mobile Home Installation Kit Part Number 346764. See “Tools
and Parts” section for information on ordering.
■ Special provisions must be made in mobile homes to
introduce outside air into the dryer. The opening (such as a
nearby window) should be at least twice as large as the dryer
exhaust opening.