Filter
Top Products
19
F232158
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
General
This section covers preventive maintenance. Even if
preventive maintenance has been reduced to a
minimum by the careful design of this machine and the
choice of components, it is necessary to maintain and
keep the machine clean. This will prolong the life of
the machine and avoid hours of probable service.
Daily
1. Check door lock and interlock before starting
operation.
2. Clean automatic supply dispenser and lid inside
and out with mild detergent. Rinse with clean
water.
3. Clean the shell, front and side panels with mild
detergent. Rinse with clean water.
4. Check drain for leaks and proper opening.
5. Check loading door for leaks. Clean the door seal
of all foreign matter.
6. Leave loading door open to air out the machine at
the end of the cycle and at the end of the day.
Monthly
1. Check V-belt for wear, proper tension and
alignment.
2. Check motor mounting bolts and clean lint from
motor.
3. Check all water connections and hose
connections for leaks. Tighten or replace as
needed.
4. Remove and clean water inlet valve and hose
screen filters. Replace if worn or damaged.
5. Check anchor bolts – tighten if necessary.
6. Wipe clean the inside of the washer and check
that all electrical components are free of moisture
and dust.
IMPORTANT: Replace any and all panels that
were removed to perform daily or monthly
maintenance.
WARNING
Before performing any maintenance,
make sure that the main power to the
machine is switched off and locked out.
W449
To help avoid personal injury, take care
when doing any maintenance or making
any check or repair. Follow
manufacturer’s instructions for all
materials used during service and
maintenance of this machine. If used or
handled improperly, they can be
hazardous. Improper or incomplete
service can also affect the machine and
result in personal injury, or damage to the
machine and may void the warranty. If you
have any question about carrying out
some service, have the work done by a
skilled technician.
W450
CAUTION