Filter
Top Products
Programming
F232139
10
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3. Use Up or Down (arrow) key to select fill
temperature: cold (CFIL), hot (HFIL) or
warm (bFIL). Press Start (#) key.
4. Use Up or Down (arrow) key to select fill level:
low level (LOLE) or high level (HILE). Press
Start (#) key.
5. Use Up or Down (arrow) key to select supply
option. Refer to Table 3. Press Start (#) key.
The Supply Dispenser Compartment functions as
follows: Supply compartment 1 flushes with each fill.
Supply compartment 2 flushes when the program calls
for supply 2 during a fill. Supply compartment 3
flushes when the program calls for supply 3 during a
fill.
The Chemical Injection Supply Nozzles located in
their respective supply compartments function as
follows: Chemical supply nozzle 1 empties into
compartment 1, chemical supply nozzle 2 and 4 empty
into compartment 2, and chemical supply nozzle 3
empties into compartment 3. Refer to Figure 2.
Figure 2
NOTE: Compartment 2 does not flush when supply
4 is called for in a program.
6. If machine is equipped with auxiliary heating
system, use Up or Down (arrow) key to select
desired segment temperature. Set value to zero to
disable auxiliary heat for this segment. Press
Start (#) key.
NOTE: Do not program heat steps for machines
not equipped with auxiliary heat. The machine will
pause for 30 minutes during any step in which the
fill water temperature does not already equal or
exceed the programmed value of the heat step.
7. Use Up or Down (arrow) key to select spin time.
Set value to zero to skip spin step. Press Start (#)
key. Display will now show the identifier for next
program segment.
8. Press the Stop (#) key to complete cycle
programming procedure.
Refer to the Cycle Charts section for detailed
description of cycles.
Supply Options
Display Supply
SUP0 No Supply
SUP1 Supply 1
SUP2 Supply 2
SUP3 Supply 3
SUP4 Supply 4
SUP5 Supply 1 and 2
SUP6 Supply 2 and 3
SUP7 Supply 3 and 4
Table 3
B009RE3A
Supply Dispenser Compartments
1 Detergent
2 Bleach
3 Softner
Chemical Injection Supply Nozzles
1 Detergent
2/4 Bleach
3 Softner
Supply Dispenser
Compartments
Chemical Injection
Supply Nozzles
1
2
3
1
2
4
3
B009RE3A