Alliance Laundry Systems UM202 Washer/Dryer User Manual


 
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
21
F232212
Maintenance
IMPORTANT: Replace all panels that are removed
to perform service and maintenance procedures.
Do not operate the machine with missing guards or
with broken or missing parts. Do not bypass any
safety devices.
Daily
IMPORTANT: Lid lock should be checked daily to
ensure proper operation. Also check that all safety
and instruction stickers are on the machine. Any
missing or illegible safety instructions stickers
should be replaced immediately.
1. Clean main body, front and side panels with mild
detergent. Rinse with clean water.
2. Clean lid of all foreign matter.
3. Leave lid open to air out the machine at end of
the cycle and at end of day.
Weekly
1. Check drain for leaks and proper opening.
2. Check all water connections and hose
connections for leaks. Tighten or replace as
needed.
Monthly
NOTE: Disconnect power to the machine at its
source before performing the monthly maintenance
procedures.
1. Clean lint from motors.
2. Remove and clean water inlet valve and hose
screen filters. Replace if worn or damaged.
3. Wipe clean inside of washer and check that all
electrical components are free of moisture and
dust.
4. Check basket ball to see if it needs grease. If
basket does not rock easily and does not return to
level position when pushed down on one side,
add grease to top of nylon basket ball cap.
5. Check extract motor vibration pads. Pads must be
replaced if pads are worn and metal is showing.
6. Tighten transmission and extract motor mounting
nuts, if necessary.
7. To clean inlet hose filter screens:
a. Turn water off and allow valve to cool, if
necessary.
b. Remove hose and screen.
c. Clean screens with soapy water. Replace worn
or damaged screens.
d. Reinstall screens.
WARNING
Sharp edges can cause personal injury.
Wear safety glasses and gloves, use
proper tools and provide lighting when
handling sheet metal parts.
W366R1
CAUTION
To help avoid personal injury, take care
when doing any maintenance or making
any check or repair. Follow manufacturer’s
instructions for all materials used during
service and maintenance of this machine.
If used or handled improperly, they can be
hazardous. Improper or incomplete service
can also affect the machine and result in
personal injury, or damage to the machine
and may void the warranty.
W357