Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
13
F232212
IMPORTANT: Installation shall conform with local
codes or, in absence of local codes, with the
National Electric Code ANSI/NFPA No. 70.
Overloaded or undersized lines, or any low voltage
condition will burn out motors and solenoid
windings.
Electrical Specifications
Voltage Designation Standard
Code Voltage Cycle Phase Wire
Full Load
Amps
Breaker AWG mm
2
C 380-450 50 3 4 5 15 14 2.5
D 220-240 50 3 3 7 15 14 2.5
F 440-480 60 3 3 5 15 14 2.5
O 208-240 60 3 3 7 15 14 2.5
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC 2001 edition.
Table 5
WARNING
Ensure that a ground wire from a proven
earth ground is connected to the ground
lug near the input power block on this
machine. Without proper grounding,
personal injury from electric shock could
occur and machine malfunctions may be
evident.
SW008