Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions
13
70400201
Figure 4
Manual Timer
MT Control Suffix
1. Set the HEAT (Drying) timer for the number of
minutes (from 0-60) desired.
2. Set the COOL DOWN (Cooling) timer for the
number of minutes (from 0-15) desired.
3. Set the Temperature selector at HIGH, LOW or
anywhere between these settings.
4. Press the PUSH TO START button in and hold it
in for approximately three seconds. This starts
the tumbler cycle.
IMPORTANT: If the door is opened during the
cycle, the heating system will shut off and the
motor will stop. To restart the cycle, door must be
closed and the PUSH TO START button must be
pressed in.
5. When the cycle is complete, open door and
remove the laundry.
TMB47N
10
20
30
40
50
60
0
PUSH
TO
START
HEAT
COOL
DOWN
HIGH
LOW
5
10
15
0
1
2
34