Filter
Top Products
1)
In case of error message on the display (e.g. E51- only tumble dryer with the display):
Switch the tumble dryer off and on. Set programme. Push the Start/Pause button. Does not
work? - inform local service and quote the error code.
2)
follow programme recommendation - see PROGRAMMES chapter
3)
see CARE AND CLEANINGchapter
4)
see section MACHINE SETTINGS in HINTS AND TIPS chapter
5)
only dryers with the display
6)
Only dryers with drum light.
7)
Note: After maximum 5 hours the drying cycle ends automatically (see Drying cycle
complete section).
SERVICE
If there are technical faults, first check if
you can remedy the problem yourself
with the help of the operating instruc-
tions - see section TROUBLE SHOOTER
If you cannot remedy the problem on
your own, get in touch with the Cus-
tomer Care Department or one of our
service partners.
To assist you quickly, these data are
necessary:
– Model name
– Product number (PNC)
– Serial number (Ser. No. is on rating
plate attached to the product - to find it
see chapter PRODUCT DESCRIPTION))
– Type of failure
– Any error messages shown by the dis-
play.
So that you have the necessary refer-
ence numbers from your appliance at
hand, we recommend that you write
them in here:
Mod. .................................
PNC: .................................
Ser. No. .................................
ENGLISH 19