Filter
Top Products
THE DELICATE FUNCTION
To dry more lightly the sensitive and
temperature sensitive textiles (e.g.
acrylic, viscose). For fabrics with the
symbol
on the fabric label. Pro-
gramme operates with decreased heat.
THE SENSITIVE FUNCTION
To dry lightly of fabrics that are fre-
quently worn. Programme starts on full
heat setting, which is then decrease as
the programme continue to be lightly
to the laundry.
THE ANTICREASE FUNCTION
Extends anticrease phase (30 minutes)
at the end of the drying cycle to 90 mi-
nutes. This function prevents laundry
from creases. Laundry can be removed
during the anticrease phase.
THE BUZZER FUNCTION
When the buzzer function is activated
you can hear the buzzer at the:
•cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
THE DELAY START FUNCTION
Let to delay the start of a drying
programme by 3, 6 or 9 hours.
1. Set the drying programme and
functions.
2. Push the Delay start button as
many times as necessary.
3. To activate the Delay start function,
push the Start/Pause button. The
LEDs (9H, 6H, 3H) change on each
3 hours.
STARTING A PROGRAMME
To activate the programme push the
Start/Pause button. The LED above the
push button changes the colour to red.
CHANGE A PROGRAMME
To change a programme, turn the pro-
gramme dial to
(off) and then set the
programme again.
AT THE END OF PROGRAMME
When the drying cycle is complete,
LEDs End and Filter are on . If the Buz-
zer function is on, an acoustic signal
sounds intermittently for about one mi-
nute.
The drying cycles (except for the
Wool care programme) are au-
tomatically followed by an anti-
crease phase which continue
around 30 minutes. The laundry
can be removed during the anti-
crease phase (The laundry
should be taken out towards the
end of the anti-crease phase at
the latest to prevent creases
from forming.) . If Anticrease
function is set, the anti-crease
phase is increased by 60 mi-
nutes.
To remove the laundry:
1.
Turn the programme dial to
(off)
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
After each drying cycle: clean
the filter
(See chapter CARE AND
CLEANING.)
14