Filter
Top Products
Troubleshooting
122
If you do not find the required information in this manual to remedy a
disturbance, please call the customer service.
The drying result is
unsatisfactory
Wrong program selected
Set a different (time)
program for the next
drying process
Fluff filter clogged Clean the fluff filter
condenser covered with
fluff
Cleaning the condenser
Incorrect amount of
laundry filled-in
Keep to the recom-
mended amount of
laundry to be filled-in
Laundry drained insuffi-
ciently before drying
Drain the laundry
adequately
Ventilation slits in the
base region covered-up
Clear the ventilation slits
in the base region
Deposit on the inside
surface of the drum or on
the drum ribs
Clean the inside surface
of the drum and the
drum ribs
The drying process takes
unusually long
condenser covered with
fluff
Cleaning the condenser
Fluff filter clogged Clean the fluff filter
The fill-in door cannot be
closed
Fluff filter not inserted
and/or filter lid not
latched
Insert the fluff filter and/
or let the filter lid latch
into position
Display Z EMPTY WATER is
lit
Condensate container full
Empty the condensate
container
Z EMPTY WATER indicator
illuminated, even though the
container has already been
emptied
Foreign bodies, e. g. ani-
mal hairs, can block the
inlet nozzle as well as the
valve on the end of the
EMPTY WATER container
With the container pulled
out, switch on the
appliance momentarily.
The blockage can be
removed from the contai-
ner shaft or the hair clea-
ned out of the valve
Problem Possible cause Remedy