Filter
Top Products
Drying
114
Take-out laundry or put-in laundry when necessary
You can interrupt the drying process at any time to take out some
laundry or to put in more laundry.
0 Open the fill-in door.
1
Caution! The laundry and the drum may be
hot.
0 Take out or put in some laundry.
0 Close the fill-in door.
0 Press the
X START button to resume the
drying process.
End of the drying process
The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase. Actual drying also
terminates with the cooling phase. The Z EMPTY WATER display will
light up to indicate the end of the cooling phase.
After the cooling phase you can take the laundry out of the dryer.
The crease guard phase (approx. 30 mins.) follows automatically after
the drying process. The drum rotates intermittently. This keeps your
laundry loose and crease-free.
Take out the laundry
0 Open the fill-in door and take out the laundry.
Switch-off the dryer
0 Turn the program selector to the Y OFF position.