Filter
Top Products
Operating instructions
29
Error code (d appears
Door is probably not closed
properly.
Close the door again. Press
the door firmly in the area of
the lock.
Washing machine
vibrates during opera-
tion or is unstable.
The height adjustable
threaded feet are not cor-
rectly adjusted.
Adjust the feet as per the
installation and connection
instructions.
There is only very little wash-
ing in the drum (e.g. only a
toweling dressing gown).
Function is not impaired.
Water could not be com-
pletely pumped out prior to
spinning because
the drain hose is kinked
or
the circulation pump is
clogged.
Check the drain hose and if
necessary remove any kink or
clean the circulation pump
and remove any foreign bod-
ies from the pump housing.
Excessive foaming dur-
ing the main wash
Probably too much detergent
was used.
Dose detergent exactly in
accordance with the manu-
facturer’s instructions.
Water runs out from
under the washing
machine.
Threaded fitting on the
water inlet hose is leaking.
Screw the inlet hose tight.
Drain hose is leaking.
Check drain hose and if nec-
essary replace.
Circulation pump cover is
not closed properly.
Close cover properly.
Washing is trapped in the
door.
Stop the program, remove
washing from the door, start
a new program.
Softener is not washed
in, the À compart-
ment for conditioner is
full with water.
Suction cap in the compart-
ment for conditioner is not
correctly positioned or is
blocked.
Clean detergent drawer,
place suction cap firmly in
position.
Washing is creased.
Too much washing was
placed in the appliance.
Put less washing in the appli-
ance.
Malfunction Possible Cause Remedy