Filter
Top Products
Instructions for use
30
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
Problem Possible Cause Remedy
The washing machine
does not work.
The mains plug is not
plugged in.
Plug in the mains plug.
The fuse of the building's
wiring is not in order.
Replace the fuse.
The filling door is not cor-
rectly closed.
Close the filling door; The
lock must engage audibly.
The button START/PAUSE
(START/PAUZE, MARCHE/
PAUSE) was not pressed for
long enough.
Press the button START/
PAUSE (START/ PAUZE,
MARCHE/PAUSE) until the
program begins.
The filling door cannot
be closed.
The child safety feature is
set.
Cancel the child safety fea-
ture (see the section ”Child
Safety Feature”).
The indicators DOOR
(DEUR, PORTE) and
MAIN WASH (HOOFD-
WAS, LAVAGE) flash.
The filling door is not
correctly closed.
Close the filling door cor-
rectly. Restart the program.
No water runs in.
The indicator RINSE+
(SPOELEN+,
RINCAGE+) flashes.
Water valve not closed. Open the water valve.
Filter in screw connection of
the intake hose blocked.
Close the water valve.
Unscrew the hose from the
water valve, remove the filter
and clean it under running
water.