Filter
Top Products
Instructions for use
22
Start the Washing Program
0 1. Check that the water valve is open.
2. Start the washing program: Press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE).
The washing program is started.
3
The filling door is not correctly closed if the indicators DOOR (DEUR,
PORTE) and MAIN WASH (HOOFDWAS, LAVAGE) flash red when the
button START/PAUSE (START/PAUZE, MARCHE/PAUSE) is pressed. In this
case, press the filling door firmly closed and press the button START/
PAUSE (START/PAUZE, MARCHE/PAUSE) again.
Completion of the Washing Program
Program Sequence Display
Before the start, the program steps to be carried out are
displayed by the program sequence display. The current
program step is displayed during the washing program.
Changing a Washing Program
Changing or aborting a program
0 1. Press button START/PAUSE (START/PAUZE, MARCHE/
PAUSE).
2. Turn programme knob to OFF (UIT, ARRET). The washing program is
aborted.
3. If required, set a new washing program. Otherwise turn the programme
knob to PUMP OUT (POMPEN, VIDANGE) and then press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE).
3
The washing program can be interrupted at any time with the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE) and continued by press-
ing the button again. Changing the washing program is possible only
after the programme knob was turned to OFF (UIT, ARRET).