Filter
Top Products
Operating Instructions
20
Change Spin Speed / Select Rinse Hold
0 If necessary, change the spin speed for the final
spin / select RINSE HOLD:
Press the button Spin speed/RINSE HOLD as often
as necessary until the indicator for the required
spin speed (or of RINSE HOLD) lights up.
If RINSE HOLD is selected, the washing remains in
the last rinsing water and is not spun.
3
If you do not change the spin speed, the final spin
is automatically adapted depending on the washing program:
The speed of the intermediate spin depends on the selected program
and cannot be changed.
Set the delay timer/soaking duration
Delay timer
The button DELAY TIMER enables you to delay the start of a washing
program between 1 and max. 19 hours.
0 To do this, press the button DELAY TI-
MER as often as necessary until the re-
quired start delay is shown in the Multi-
display, e.g. in the form 12h to delay
the program start for 12 hours.
If 19h is displayed and you press again,
the run time of the washing program set appears display in minutes,
e.g. 125). No delay timer can be set in this state.
Soaking duration
With the SOAKING button pressed, you can extend the soaking dura-
tion with the button DELAY TIMER from 1 to max. 19 hours.
3
Without delay timer, the soaking duration is approx. 1 hour.
– COTTONS/LINEN 1000 revolutions per minute
– EASY-CARES/EASY IRON 1000 revolutions per minute
– DELICATES 1000 revolutions per minute
– WOOL/P (Handwash) 1000 revolutions per minute