Filter
Top Products
31
7. Unscrew cover plates E from the
front of the machine, rotate
through 180, screw on the opposite
side.
8. Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9. Press snap-in button G in and down,
press cover down slightly and re-
move from front of the machine.
10. Transfer door lock F to the opposite-
side and screw down.
11. Fix cover G on to the other side and
allow the snap-in button to lock in
place.
12. Insert loading door and hinges into
recesses on the front of the ma-
chine and screw down.
Note regarding contact protection: The machine is only secure for
operations again once all plastic parts have been inserted.