Filter
Top Products
press the Delay Start button once, the light relevant to the selected delay goes
off;
press the Start/Pause button again to start the programme.
Important!
The selected delay can be changed only after selecting the washing programme
again.
The door will be locked throughout the delay time. If you need to open the
door, you must first set the washing machine to PAUSE by pressing the
Start/Pause button and then wait some minutes. After you have closed the
door, press the Start/Pause button again.
The Delay Start can not be selected with Drain programme
.
Programme progress display
After having pressed the Start/Pause button, the «HOOFDWAS LAVAGE»
(Functioning) pilot light comes on.
When the «HOOFDWAS LAVAGE» (Functioning) pilot light illuminates, this means
that the machine is performing the washing cycle.
When the programme has finished, the «EINDE FIN DE
CYCLE» (End) pilot light comes on.
When the appliance is performing additional rinses
the «SPOELEN+ RINCAGE+» (Extra rinse) pilot light
comes on.
Select an additional rinse
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press simultaneously buttons «CENTRIFUG. ESSOR-
AGE» (Spin) and «VLEKKEN TACHES» (Stain) for some
seconds: the light «SPOELEN+ RINCAGE+» (Extra
rinse) comes on in the programme progress display.
This function stays permanently on. To remove it
press the same buttons again until the light «SPOELEN+ RINCAGE+» goes off.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
Start/Pause button.
15
Use
HOOFDWAS
LAVAGE
EINDE
FIN DE CYCLE
SPOELEN
RINCAGE
SPOELEN
RINCAGE
132970011.qxd 23/04/2009 10.25 Pagina 15