AEG 54840 Washer User Manual


 
will light up.
Maximum speeds are:
1400 rpm for cotton, ECO, Rinses and Spin programmes
900 rpm for the remaining of the programmes.
Rinse Hold : by selecting this option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When the programme has finished the
pilot light «EINDE FIN DE CYCLE» (End) illuminates, the Start/Pause light and the
«HOOFDWAS LAVAGE» (Functioning) pilot light are off and the door is blocked to
indicate that the water must be emptied out.
To empty the water out:
turn the programme selector dial to «
O»
select the Drain (POMPEN VIDANGE) or Spin (CENTRIFUG. ESSORAGE)
programme
reduce the spin speed if needed, by means of the relevant button
press Start/Pause button
when the programme has finished only the pilot light «EINDE FIN DE CYCLE»
(End) comes on.
Programme option buttons
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before pressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, an integrated yellow pilot light of the Start/
Pause button flashes for 3 times.
Important!
For the compatibility among the washing programmes and the options, see
chapter «Washing Programmes».
Select the Stain option
Press the «VLEKKEN TACHES» (Stain) to treat heavily
soiled or stained laundry with stain remover
(extended main wash with time optimised stain
action phase).
Attention! If you wish to perform a programme
with the Stain option, pour stain remover into
compartment .
13
Use
1400
900
700
CENTRIFUG.
ESSORAGE
VLEKKEN
TACHES
SUPERSNEL
RAPIDE
132970011.qxd 23/04/2009 10.25 Pagina 13