Filter
Top Products
21
Fabric softener not
rinsed in,
w compartment for
conditioners is filled
with water.
Fabric softener insert in the
compartment for condition-
ers is not correctly inserted
or is blocked.
Clean the detergent drawer,
insert the fabric softener
insert firmly.
The door cannot be
opened when the wash-
ing machine is switched
on.
Door locked.
Wait until the K (DOOR) in-
dicator has gone out and the
E (END) indicator is illumi-
nated.
There has been a power cut.
(All indicators are off.)
The door will remain locked
for approx. 2 minutes.
The programme will continue
when the power cut is over.
To remove washing:
If water can be seen in the
appliance, first drain the wa-
ter before opening the door
(see section ”Carrying out an
emergency drain”).
Washing is very creased.
Too much washing may
have been loaded.
Observe maximum loads.
Problem Possible cause Remedy