26
English
8. Maintenace
■ PROCEDURES TO BE
PERFORMED AFTER EVERY
100 HOURS OF USE
1. Remove the muffler, insert a
screwdriver into the vent, and wipe
away any carbon buildup. Wipe
away any carbon buildup on the
muffler exhaust vent and cylinder
exhaust port at the same time.
2. Tighten all screws, bolts, and
fittings.
3. Check to see if any oil or grease
has worked its way in between the
clutch lining and drum, and if it has
wipe it away using oil-free,
lead-free gasoline.
■
MAINTENACE BEFORE STORAGE
1. Brushing off dirt form the machine,
check damage or slack of each
part. If you find out abnormalities,
repair them for the next use.
2. Extract fuel from the tank, and
loose the drain screw of the float
cabin extract fuel, turn on the
engine, and leave it running until it
stops naturally.
3. Remove the spark plug and put in
1~2 cc of 2-cycle oil in the engine.
Draw the starter rope 2~3 times,
set the plug back, and stop it at
the contraction position.
4. Apply anti-rust oil to the metal
parts such as the throttle wire, put
the cover on the blade, and keep it
indoor avoiding dampness.
MA14
