6Setups
130
NOTE: For Server Fax, the available information fields are [Fax Number], [Name], and
[Index] only.
Relay Station Setup Specify whether or not the registered
Address Number is to be identified as an
initiating relay broadcast station when the
machine is used as a relay broadcast
station.
NOTE: Before using the Relay Broadcast
feature, enter the Address Numbers for
initiating stations regardless of the
initiating method from the stations.
Off
Starting Rate Select a communication mode from
among [G3 Auto] and [Forced 4800 bps].
G3 Auto
Resolution Select a resolution level to be used for
transmission, from among [Panel],
[Standard (200x100 dpi)], [Fine (200 dpi)],
[Superfine (400dpi)], and [Superfine
(600dpi)]. With [Panel] selected, the
resolution level selected on the control
panel is used.
Panel
Cover Page Specify whether to attach a Cover Note. If
you select [Print Cover Page], then select
a comment for a recipient and/or a
sender.
NOTE: Unless registered beforehand,
comments cannot be selected. For
information on how to register comments,
refer to
Add Fax Comment on page 133
.
Off
Maximum Image Size Select the maximum image size,
depending on recipients’ paper size, from
among [A3], [B4], and [A4]; or among [8.5
x 11"], [B4], and [11 x 17"] (depending on
the country).
11 x 17"
Delay Start Select whether to specify the
transmission start time. If you select [On],
then specify the start time.
Off
Remote Mailbox Specify whether to send as confidential
fax documents. If you select [On], then
enter the recipient’s mailbox number (3
digits) and passcode (4 digits).
Off
F Code Specify whether to perform F Code
transmission. If you select [On], then
enter the appropriate F Code and
password.
Off
Relay Broadcast Specify whether to use the machine as an
initiating relay broadcast station in order
to use the registered Address Number as
a relay station. If you select [On], enter a
Relay Station ID, Broadcast recipients,
and Print at Relay Station.
Off
Item Description Default
