A SERVICE OF

logo

Open as PDF
next previous
USING THE ONETOUCH BUTTON PANEL 31
2. Make the changes on the OneTouch Properties window.
3. Click OK to save the changes.
After the changes have been saved, the Detail View of the button
will change to reflect your new settings.
4. To close the OneTouch Button Panel, click the close button on the
panel.
Note: The configurations
shown on this example of
the OneTouch Properties
window are for illustration
purposes only. The
configurations you see on
your OneTouch Properties
window may be different.
Important: See “Configuring the OneTouch Buttons” on page 34 for
the steps to make changes to the button settings.