E6580757
H-4
8
Error code
Communi-
cation No.
Description
(*) 0 No error
(Note) Past trip records (trip records retained or trips that occurred in the past) can be called up. (Refer to 8.1
"Status monitor mode" for the call-up procedure.)
(*) Strictly speaking, this code is not an error code; this code is displayed to show the absence of error
when the past trip monitor mode is selected.
■ Example of call-up of trip information
Item displayed
Key
operated
LED
display
Communi-
cation No.
Description
Status monitor mode (The code blinks if a trip oc-
curs.)
The motor coasts and comes to a stop (coast
stop).
Parameter setting
mode
The first basic parameter "Automatic accelera-
tion/deceleration ( )" is displayed.
Operation fre-
quency
FE00
The operation frequency at the occurrence of a trip
is displayed.
Direction of rota-
tion
FE01
The direction of rotation at the occurrence of a trip
is displayed. ( : forward run, : reverse run)
Operation fre-
quency command
FE02
The operation frequency command value at the
occurrence of a trip is displayed.
Load current FE03
The inverter output current at the occurrence of a
trip is displayed. (Default setting: unit %)
Input (DC) voltage FE04
The inverter input (DC) voltage at the occurrence
of a trip is displayed. (Default setting: unit %)
Output voltage FE05
The inverter output voltage at the occurrence of a
trip is displayed. (Default setting: unit %)
Input terminal FE06
The ON/OFF status of each of the control signal
input terminals (F, R, RST, S1, S2 and S3) at the
occurrence of a trip is displayed in bits.
ON:
OFF:
Output terminal FE07
The ON/OFF status of each of the control signal
output terminals (RY, OUT and FL) at the occur-
rence of a trip is displayed in bits.
ON:
OFF:
CPU version FE08 The version of the CPU is displayed.
(Continued overleaf)
Input terminal
S3
Input terminal
S2
Input terminal (F)
Input terminal (R)
Input terminal (RST)
Input terminal (S1)
Output terminal (FL)
Output terminal (OUT)
Output terminal
(RY)
*1
