A SERVICE OF

logo

4.13 Wireless LAN card 4 Replacement Procedures
4.13 Wireless LAN card
Removing the Wireless LAN card
The following describes the procedure for removing the Wireless LAN card. (See Figure 4-
19.)
1. Disconnect the speaker cable from the connector CN6150 on the system board and
pull out the cable from the guide of mini PCI cover.
2. Remove the following screws securing the mini PCI cover and remove the mini PCI
cover.
M2.0x4.0Z BIND screw x1
3. Disconnect the wireless LAN antenna cables from the connectors on the wireless
LAN card.
4. Open the left and right latches securing the wireless LAN card and remove the
wireless LAN card from the connector of mini PCI.
M2.0x4.0Z BIND
Mini PCI cover
Speaker cable
CN6150
Wireless LAN card
Figure 4-19 Removing the Wireless LAN card
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-33