A SERVICE OF

logo

20
Chapter 1
Setting Up the dynadock™
and Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1 Assemble the dynadock™
2 Connect the power adaptor
3 Install the software
4 Connect the dynadock™ to your computer
You may either:
a Set up a wireless connection
OR
b Set up a USB cable connection
For more information on each step, refer to the appropriate section
on the indicated page.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™