A SERVICE OF

logo

4.19 CPU 4 Replacement Procedures
CAUTION: Silicon grease is applied between the fin and the CPU. When removing the
fin, be careful not to damage the CPU under the fin.
CPU holder
FIN
M2
×
4B BIND
Figure4-28 Removing the CPU holder and fin
4. Unlock the CPU by rotating the cam on the CPU socket 180 degrees
counterclockwise with a flat-blade screwdriver (in the order shown in the figure
below).
5. Remove the CPU.
Cam
Figure 4-29 Unlocking the CPU
Satellite M30-35 Maintenance Manual (960-455) 4-51