A SERVICE OF

logo

16
Front Panel
Back Panel
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin denitions are described below.
12V DC is outputted from 1-pin only when connected to a power supply.
Pin Name
1 12V DC Output
2 Digital Output
3 Digital Input
4 Ground
Physical Description
When you connect
or disconnect a wire,
use the orange push-
button.
NOTE
Built-in Microphone
Lens
Status LED
4 3 2 1
WPS/RESET
microSD
Power Cord Socket
Ethernet 10/100 RJ45 Socket
WPS/Reset Button
General I/O Terminal Block
Audio Out
Microphone In
MicroSD/SDHC Card Slot
Antenna
(IK-WB16A-W only)
Cable Clip
4 3 2 1