51
Setting up the
Network Setup
Options
4
Perform resetting the GA-1140.
P109 “Resetting the GA-1140”
• The setting changes on the Network options is applied after resetting the printer. If you want to set
other network options, you can also proceed the operation for setup before resetting the printer.
Setting up from TopAccess
1
Accessing the TopAccess for Administrator.
P23 “Accessing TopAccess for Administrator”
2
Accessing the IPX/SPX Setup page.
1. Click on the Network SETUP menu.
2. Click on the IPX/SPX tab.
3
Check the box for frame types to be used and
press [SETUP].
4
The message “Reset the Printer Enable
Setting” is displayed on the top of a page.
Perform resetting the GA-1140.
P125 “Resetting the GA-1140”
• The setting changes on the Network options is
applied after resetting the printer. If you want to set
other network options, you can also proceed the
operation for setup before resetting the printer.
Auto
Check this to use an appropriate frame type that the GA-1140 finds first.
Ethernet_802.3, Ethernet_802.2, Ethernet_II, Ethernet_SNAP
Instead of “Auto”, check the frame types to be used from these options. The GA-1140 will use
all frame types selected here. These can be checked only when “Auto” is checked off.
