English -
27
6
Press the †… buttons to select a PR
(program) you wish to edit, delete, or
swap. And then press OK button.
7
Select Edit, Delete, or Swap.
• In case of Edit : you can add or edit PR(program)
- CH : Tune the channel using œ √ buttons or number
buttons.
- MFT : You can tune up the channel frequency better
using œ √ buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can
edit name by using †…œ √ buttons.
• In case of Delete : the channel information of selected
PR(program) will be removed.
• In case of Swap : You can swap the channel
information of two PR(program). For example, if you
wish to swap PR2 and PR5, select swap at PR2, then
press OK button or √ button at PR5.
You can add preset channel that Auto Channel Search
missed. And you can delete a channel you wish to
remove.
1
With the unit in Stop mode, press the
MENU button on the remote.
2
Using the †… buttons, move the
selection bar to “Setup” then press OK
button to select.
3
Using the †… buttons, move the
selection bar to “System” then press OK
button to select.
4
Using the †… buttons, move the
selection bar to “Install”, then press OK
button to select.
5
Move the selection bar to “Manual
Setup”, then press OK button to select.
Manual Setup
RETURNOKMOVE EXIT
Setup
DVD-RAM(VR)
System
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
RETURNOKMOVE EXIT
System
DVD-RAM(VR)
Clock Set
√√
Install
√√
CM Skip Time : 15 Sec
√√
AV1 Output : Video
√√
NICAM : On
√√
RETURNOKMOVE EXIT
Install
DVD-RAM(VR)
Auto Setup
√√
Manual Setup
√√
RETURNOKMOVE EXIT
Manual Setup
DVD-RAM(VR)
01 5
----
√√
02
--- ----
√√
03
--- ----
√√
04
--- ----
√√
05
--- ----
√√
06
--- ----
√√
07
--- ----
√√
PR CH Name Edit
Edit
Delete
Swap
System Setup
MOVE OK
Manual Setup
Done
PR 01
CH
- - -
Name
- - - -
MFT
00566A-D-R3_14~35 8/31/04 10:28 AM Page 27
