43
GB
Additional Information
Erasing a learned function
1 Press and hold the t button for approximately six seconds until the AUX green light
flashes (see fig. 7).
2 While pressing the % button, press the button (a - g) with the learned function that you
want to erase (see fig. 8).
All the four lights illuminate at the same time (see fig. 9) and as soon as the learned
function is erased, the AUX green light starts flashing (see fig. 10).
3 If you wish to store a new function, repeat steps 3 and 4 from the previous page, otherwise
press the
t button to return to normal operation.
Erasing all the learned functions in one time
1 Press and hold the t button for approximately six seconds, until the AUX green light
flashes (see fig. 11).
2 While pressing the % button, press t to erase all the learned functions (see fig. 12).
All the four lights illuminate at the same time (see fig. 13) and as soon as all the
learned function are erased, the remote control automatically returns to the normal
operation.
fig. 8
fig. 13
fig. 12
V
C
R
T
V
D
V
D
A
U
X
MODE
fig. 9
V
C
R
T
V
D
V
D
A
U
X
MODE
fig. 10
V
C
R
T
V
D
V
D
A
U
X
MODE
+ a-g
V
C
R
T
V
D
V
D
A
U
X
MODE
fig. 2
6 sec.
V
C
R
T
V
D
V
D
A
U
X
MODE
fig. 11
6 sec
