HVL-MT24AM_GB 2-889-493-01 (1)
21
Preparations
Auto power ON/OFF
Press the flash ON/OFF button on the back of the macro flash
controller.
Power of the macro ash controller comes on.
When the power of the macro ash controller
is turned on, the ash-ON lamp on the control
panel comes on.
If you press the ash ON/OFF button while the
macro ash controller is turned on, the macro
ash controller switches o and the ash-OFF
lamp on the control panel comes on.
e ash-OFF lamp goes out aer about 10
seconds.
Auto power off
If the camera or macro ash controller is not used for four minutes, the power
switches o and control panel indicators disappear automatically to save the
batteries.
You can disable auto power o or change the auto power o time by changing
the customized settings (p. 48).
