4
Utility Menu
Press and hold both arrow keys to enter and exit the utility menu, which is used to access network and display settings.
hold both arrow keys
Device ID
This eight-character name is displayed when this device is detected on other net-
work devices or in WWB software.
1. Press SET key to enable editing.
2. Use the arrow keys to change the characters.
3. To finish editing, press the SET key until none of the characters are highlighted.
IP Address Mode: Automatic
This is the default setting for use with a DHCP server, which automatically assigns
an IP address.
1. Navigate to the IP Mode menu and press the SET key.
2. Use the arrow keys to highlight Automatic.
3. Press the SET key.
4. Use the arrow keys to move the ► to select OK to save or Cancel to discard, and
then press the SET key.
IP Address Mode: Manual
Use manual IP addressing to set the IP address and subnet mask when a DHCP
server is not available.
1. Navigate to the IP mode menu and press the SET key.
2. Use the arrow keys to highlight Manual.
3. Press the SET key to enable editing of the IP address and the subnet mask.
4. Use the arrow keys to move the ► to select IP: or Sub:
5. Use the arrow keys and the SET key to edit the IP address and subnet mask.
6. Use the arrow keys to move the ► to select OK to save or Cancel to discard, and
then press the SET key.
MAC (MAC Address)
Displays the MAC address, which is an embedded, uneditable identification num-
ber unique to each device. Used by the network and WWB software to identify
components.
Display Invert
This changes the LCD menu from white text on dark background to dark text on a
light background.
Firmware
Displays the version of firmware installed on this device.
Fan (Cooling Fan Mode)
Automatic
The fan is enabled and adjusts speed based on the internal temperature of the
unit.
Always on
The fan runs continuously at maximum speed to provide maximum cooling in
warm environments.
Serial Number
Displays the serial number.
Brightness
Sets the brightness of the LCD to low, medium, or high.
Storage Mode
OFF
Normal charge.
Store at 3.8 V
Charges or discharges all batteries to bring them to a 3.8 volts, ideal for long
term storage.
▲
▲
SET
Device ID:
[ AXT900 ]
