16
INITIAL SETTINGS
To change the order of display of the date, follow the steps below:
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "1:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "32:DATE&TIME FORMAT"
appears, and then press the [OK] key.
4
Press the [ ] key ( ) or [ ] key ( )
until "2:DATE FORMAT" appears, and
then press the [OK] key.
5
Press the [ ] key ( ) or [ ] key ( )
to select the display order.
The selections are as
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
6
Press the [OK] key.
7
Press the [MENU] key.
Press the [MENU] key to
exit.
This selection does not affect the order of
the date that appears in "22:DATE & TIME
SET" in step 1 on page 14.
The date in this step always appears in the
format "YYYYMMDD".
"1:USER PROGRAM"
Selection
"32:DATE&TIME FORMAT"
Selection
