14
SETTING THE DATE AND TIME
Following to the language setting, Date and Time setting screen appears. Set the date and time by pressing the
keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key ( ) and re-enter the number.
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day"
can be selected for the order of display of the date.
Use the following procedure to set the date and time:
1
Enter the year (two digits), month (two
digits), and day (two digits) with the
numeric keys and then press the [OK]
key.
2
Enter the time (hour (two digits) and
minute (two digits)) with the numeric
keys.
Enter the hour in the following range:
When 12-hour format is selected: 01 to 12
When 24-hour format is selected: 00 to 23
3
Press the [ ] key ( ) or [ ] key ( )
to select "AM" or "PM".
When 24-hour format is
selected, do not perform
this step.
4
Press the [OK] key.
ENTER DATE (2010-)
2011/01/02
Year
Month Day
The year can be entered from 2010.
