REFRIGERATOR COMPONENTS
1.
Control
panel: The operation status is displayed
on
this panel; temperature setting is also available.
Refer to page
11
for details.
2.
Air
intake vent: Ensure this vent is never blocked. Failure to
do
so will result
in
unstable temperature
distribution
in
the refrigerator.
3.
Lock:
Turn the key clockwise through 180 degrees to lock the
door.
4.
Door
handle: Always hold the handle when opening or closing
the
door.
5.
Access
port:
This port allows cables to
be
passed into the cabinet.
6.
Remote alarm terminal: This may
be
used
to trip
an
alarm if unit is switched off, unplugged
or
power to
the unit is otherwise cut. See page
15
for details.
7.
Leveling feet: Use these to adjust the height and level the unit for installation.
8. Shelf: Items to
be
stored
in
the chamber must
be
placed
on
the shelves. The maximum storage weight
for each shelf is 28
Kg.
Do not place stored items directly onto the interior floor of the chamber.
9.
Evaporating
tray
(back
side): The defrost water from the evaporator accumulated
in
this tray. Wipe off
the water occasionally.
10. Magnetic
door
gasket:
This prevents cold air
from
escaping. Always keep clean.
11. Temperature
sensor:
Located on the rear of the chamber, behind the fan
cover.
10
English
