26
Video Input
AV System Menu (Video or S-Video)
AV System Menu (Component)
Select the AV System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
Choose the system that you want to select with the Point
Up/Down button and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
Auto
Component Video Signal Format
Video or S-Video
Component
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
Auto
Video System Selection
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
If the output signal of the video equipment and the input signal of the
projector do not match, you might not get the image with the best
quality.
If the black part of the picture appears unclear (too dark or too light),
try to select the input signal with "HDMI setup" in setting menu on
page 43.
Selected system
HDMI
AV System Menu (HDMI)
