Sanyo PLC-XW250K Manual

A SERVICE OF

next previous

17

Installation

Connecting the AC Power Cord

Thisprojectorusesnominalinputvoltagesof100-120V or

200–240VACanditautomaticallyselectsthecorrectinput

voltage. It is designed to work withsingle-phase power

systems having a grounded neutral conductor. To reduce

theriskofelectricalshock,donotplugintoanyothertypeof

powersystem.

If you are not sure of the type of power being supplied,

consultyourauthorizeddealerorservicestation.

Connect theprojector with allperipheralequipmentbefore

turningtheprojectoron.

Note:

UnplugtheACpowercordwhentheprojectorisnot

inuse.Whenthisprojectorisconnectedtoanoutlet

withtheACpowercord,itisinStand-bymodeand

consumesalittleelectricpower.

TotheACoutlet.

(200 - 240 V AC)

NOTE ON THE POWER CORD

ACpowercordmustmeetrequirementofthecountrywhereyouusetheprojector.

ConfirmtheACplugtypewiththechartbelowandproperACpowercordmustbeused.

IfsuppliedACpowercorddoesnotmatchyourACoutlet,contactyoursalesdealer.

Topowercord

connectoronyour

projector.

Projector side

AC outlet side

Ground

TotheACoutlet.

(120 V AC)

For the U.S.A. and Canada

TotheACoutlet.

(200 - 240 V AC)

For the U.K.For Continental Europe



CAUTION

TheACoutletmustbenearthisequipmentandmustbe

easilyaccessible.

ConnecttheACpowercord (supplied) to the

projector.