A SERVICE OF

logo

Open as PDF
next previous
SelectComputer1bypressingtheCOMPUTERbuttonon
theremotecontrol.
BeforeusingCOMPUTERbutton,selectthecorrectinput
sourcethroughMenuoperationasdescribedbelow.
UsetheMENUbuttontodisplaytheOn-ScreenMenu.
Press the Point ◄► buttons to move the red frame
pointertotheInputMenuicon.
1
Computer
1
Input Menu
Use thePoint▲▼ buttons to move the red arrow
pointer to Computer 1 and then press the SELECT
button.
2
AftertheSourceSelectMenuappearedforComputer
1,movethepointertoComponentorRGB(Scart)and
thenpresstheSELECTbutton.
3
COMPUTER button
Computer 1
Computer 2
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Menu Operation
Movethepointer(redarrow)
toComputer1andpressthe
SELECTbutton.
InputMenuicon
MovethepointertoComponent
orRGB(Scart)andpressthe
SELECTbutton.
Source Select Menu
Remote Control
COMPUTER button
Whentheinputsourceiscomingfromvideo
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable (not supplied),
selectComponent.
Component
Whentheinputsourceiscomingfromvideo
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Scart-VGA Cable (not supplied), select
RGB(Scart).
RGB (Scart)
Note:
• Computer 2 is not displayed when the COMPUTER IN 2/
MONITOR OUT terminal is set as Monitor out (p.44).
• Computer 2 (COMPUTER IN 2/MONITOR OUT) can
accept only RGB signal.
• When the Input Search function is set On1 or On2, the
input signal will be searched automatically (p.44)
*SeeNoteatthebottomofthispage.
35
Video Input
*