A SERVICE OF

logo

Open as PDF
next previous
When Digitalzoom + is selected, the On-Screen Menu
disappears and “D. zoom +” is displayed. Press the
SELECTbutton toexpand the image size. Use the Point
▲▼◄►buttonstopantheimage.ThePanningfunctioncan
workonlywhentheimageislargerthanthescreensize.
Aprojectedimagecan bealso expandedby pressingthe
D.ZOOM▲buttonontheremotecontrol.
Di�ital zoom +
WhenDigitalzoom–isselected,theOn-ScreenMenu
disappearsand“D.zoom–”isdisplayed.Pressthe
SELECTbuttontocompressimagesize.
Theprojectedimagecanbealsocompressedbypressing
theD.ZOOM▼buttonontheremotecontrol.
ToexittheDigitalzoom+/–mode,pressanybuttonexcept
theD.ZOOM▲▼,SELECT,andPointbuttons.
Toreturntothepreviousscreensize,selectascreensizein
theScreenSizeAdjustmentorselectaninputsourcefrom
theInputSourceSelection(p.25)again,oradjustthescreen
sizewiththeD.ZOOM▲▼buttons.
Di�ital zoom –
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
For zoomin� in and out the ima�es
Note:
• The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.29).
• The minimum compression ratio can be
limited depending on the input signal or
when the Keystone function is working or
when the custom is selected for the screen
size.
• The items will be same as the items in
video source when 480i, 575i, 480p, 575p,
720p, 1035i or 1080i is selected in the PC
system Menu (p.26).
• Digital zoom +/– cannot be selected when
Full or True is selected.
• When “Custom” is selected , “Digital zoom
-” is invalid.
• True, Full and D.Zoom+/- are not available
when the 4:3 or 16:9 function is selected in
the Screen aspect (p.44).
Adjust the screen scale and position manually with this
function.
Press theSELECTbuttonatCustom andthe “Custom” is
displayed on the screen for a few seconds and then the
Aspectdialogboxappears.
ScaleH/V………AdjusttheHorizontal/Verticalscreenscale.
H&V……………Whensetto“On,”theaspectratioisfixed.
“ScaleV”appearsdimmedandbecomes
unavailable.Adjust“ScaleH,”thenthe
screenscaleisautomaticallymodified
basedontheaspectratio.
PositionH/V……AdjusttheHorizontal/Verticalscreen
position.
Common………Savetheadjustedscaletoalltheinputs.
PresstheSELECTbuttonatCommonto
displayaconfirmationbox.Tosavethe
scale,presstheSELECTbuttonat“Yes.”
WhenCustomisselected,thesavedscale
isused.
Reset…………Resetthealladjustedvalues.Press
theSELECTbuttonatResettodisplay
aconfirmationbox.Toreset,pressthe
SELECTbuttonat“Yes.”
Custom
Note:
• When no signal is detected, “Normal” is
set automatically and the Aspect dialog
box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
• When “Custom” is selected , “Digital zoom
-” is invalid.
PresstheSELECTbuttonat
CommonorReset,todisplay
aconfirmationbox.
33
Computer Input