English _23
● INSTALLATION & CONNECTION
Making a connection using the M12-RJ45 conversion cable provided
(SNF-8010VM)
Connect the M12 male connector for the conversion cable to the groove of the M12
Female connector for your camera.
Powering and networking (SNF-8010VM)
Connect a camera to a PoE equipment or connect the provided M12-RJ45 connector for
the conversion cable of your camera to a PoE equipment.
J
`
A connection method may vary depending on the installation environment of a user.
`
Connect to a PoE (Power over Ethernet) enabled router’s PoE connector.
`
Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols.
You can only use a Mode A PoE device that supplies power through data pin pair 1, 2, 3, 6.
`
Even if you use the M12-RJ45 conversion cable provided, you can only use a mode A type PoE
equipment that supplies power to data pair pins 1, 2, 3, 6.
