8
FEATURES
Before using the saw, familiarize yourself with all operating
features and safety requirements. However, do not let famil-
iarity with the tool make you careless.
WARNING:
Exercise caution when using the circular saw. Care-
less actions, for even a fraction of a second, can
result in serious personal injury.
Your new circular saw is equipped with the following fea-
tures.
See Figure 1.
SWITCH
The saw has a conveniently-located ON/OFF switch.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turn-
ing the blade screw.
Note: Do not run circular saw with the spindle lock engaged.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust
chute is located on the side of the upper blade guard.
FULL LENGTH KERF INDICATOR
Indicates blade position for more accurate cutting.
SOFT GRIP SHOCK ABSORBING FRONT
HANDLE
The soft grip handle is designed for durability and operator
comfort.
RIP GUIDE
The rip guide feature helps the operator make straight, angle
and bevel cuts.
ERGONOMIC DESIGN
The design provides for easy handling. It is designed for
comfort and ease of grasp when operating in different posi-
tions and at different angles.
POWER CORD
The 12-foot cord has a built-in cord wrap.
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
UNPACKING
INSTRUCTIONS
When unpacking the circular saw:
■ Carefully remove the tool and accessories from the box.
■ Make sure that all items listed in the packing list are
included.
■ Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
■ If any parts are damaged or missing, please call 1-866-
539-1710 for assistance.
PACKING LIST
7-1/4” (184 mm) Circular Saw
24-tooth Carbide Tipped Blade
Wrench
Rip guide
Case
Operator’s Manual
WARNING:
If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
WARNING:
This tool should never be connected to a power sup-
ply when you are assembling parts, making adjust-
ments, cleaning, performing maintenance, or when
the tool is not in use. Disconnecting the tool will pre-
vent accidental starting that could cause injury.
APPLICATIONS
You may use the saw for the purposes listed below:
■ Cutting all types of wood products (lumber, plywood,
paneling)
WARNING:
The use of this saw on materials not listed may
damage the saw and its guards, and may cause
serious personal injury.
