Supplementary Specifications
133
6
• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or
Auto Reduce / Enlarge function, “
Blank part will appear. Check
orientation.
”message may appear depending on the orientation of orig-
inals and paper you placed. In this case, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce / Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
• If you select Saddle Stitch function with the booklet finisher, the machine
staples and folds the paper in the centre, then delivers the paper folded.
• If you select Saddle Stitch function in Magazine or Booklet mode, the ma-
chine staples the paper, and folds it like a book, then delivers the paper
folded.
❖
❖❖
❖ Punch
• When using Punch and Combine, Double Copies, or Auto Reduce / En-
large, the message “
Blank part will appear. Check orientation.
”
may appear because of the orientation of the original and the copy paper.
If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary
slightly.
• Punchable paper sizes are as follows:
2 tray finisher
Punch kit type
2 & 4 holes type 2 holes
L
A3-B5 JIS, 11"
×
17"
K
A4-A5, 8
1
/
2
"
×
11"
4 holes
L
A3, B4 JIS, 11"
×
17"
K
A4, B5 JIS, 8
1
/
2
"
×
11"
4 holes type 4 holes
L
A3-B5 JIS, 11"
×
17"
K
A4-A5, 8
1
/
2
"
×
11"
2 & 3 holes type 2 holes
L
A3-B5 JIS, 11"
×
17"
K
A4-A5, 8
1
/
2
"
×
11"
3 holes
L
A3, B4 JIS, 11"
×
17"
K
A4, B5 JIS, 8
1
/
2
"
×
11"
JupiterC2_GB_Copy_F_FM.book Page 133 Friday, January 20, 2006 7:37 PM
